117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+6011-28108258
+607-2887322
JTCIS8258
- Electronic Labeling Machine & Printing Accessories
- AirTac Fittings and Tubings
- AirTac Valves
- AirTac Air Valves
- AirTac Flow Control/ Mechanical Valves
- AirTac Control Valve M3 Series
- AirTac Control Valve M5 Series
- AirTac Control Valve S3 Series
- AirTac Flow Control Hand Lever Valve
- AirTac Flow Control Valve ASC Series
- AirTac Flow Control Valve CM3 Series
- AirTac Flow Control Valve ZM3 Series
- AirTac Foot Pedal Valve
- AirTac Hand Slide Valve
- AirTac Non-Return Valve
- AirTac Pilot Non-Return Valve
- View All
- AirTac Fluid Control Valve (2/2 way)
- AirTac 2J Series Angle Seat Valve (2/2 way) (Air Piloted)
- AirTac 2KL Series Fluid Control Valve (2/2 way)
- AirTac 2KS Series Fluid Control Valve (2/2 way)
- AirTac 2KW Series Fluid Control Valve (2/2 way)
- AirTac 2L Series Fluid Control Valve (2/2 way)
- AirTac 2P Series Fluid Control Valve (2/2 way)
- AirTac 2S Series Fluid Control Valve (2/2 way)
- AirTac 2VSeries Fluid Control Valve (2/2 way)
- AirTac 2W Series Fluid Control Valve (2/2 way)
- View All
- AirTac Solenoid Valves
- AirTac ISO Solenoid Valve ESV Series
- AirTac Namur Valve
- AirTac Solenoid Valve 4V Series
- AirTac Solenoid Valve 6HV Series
- AirTac Solenoid Valve 6TV Series
- AirTac Solenoid Valve 6V Series
- AirTac Solenoid Valve CPV10 Series
- AirTac Solenoid Valve CPV15 Series
- AirTac Solenoid Valves 3V series
- AirTac Solenoid Valves 7V Series
- View All
- View All
- AirTac F.R.L.
- AirTac Cylinder
- AirTac Linear Guide Bearing
- Festo Cylinder
- Norgren
- Pneumatic Products
- Nitto Pneumatic Quick Coupler
- Hakko Eightron Hose
- Electrical Products
- Autonics Controller
- Schneider Electric
- DELTA Electronics
- HELUKABEL (Wire & Cabel)
- SIEMENS
JTC Industrial Solutions
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
LiY-CY(TP) (Flexible, Cu-screened, colour coded to DIN 47100, EMC friendly, meter marking)
| Previous | 2 / 3 | Next |
Technical Data:
- Special-PVC data cables
- Temperature Range: Flexing -5°C to +70°C ,
- Operating Peak Voltage: (not for purposes of high current and power installation) 500 V
- Test Voltage: 1500V
- Insulation Resistance: min. 10 MOhm x km
- Capacitance: (approx.-value) at 800 Hz, 120 pF/m
- Inductance: approx. 0,7 mH/km
Cable Structure:
- Bare copper-conductor, from 0,5 mm² to DIN VDE 0295 cl.5, fi ne-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of special PVC
- Core identi cation to DIN 47100, without colour repetition
- Cores stranded in layers with optimal lay-length
- Foil wrapping
- Tinned, copper braided screen,
- Outer sheath of special PVC
- Sheath colour grey (RAL 7001)
- with meter marking
Properties:
- Oil resistant, oil-/ chemical resistance
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to IEC 60332-1
Application:
These cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, LiY-CY(TP) is well suited for use in areas subject to signal interference. The high level of screening reduces substantially the eff ects of electrical disturbances from parallel running wiring etc. The copper screening is also often used as an “earth”. The twisted pairs conform favourable cross-talk attenuation values.
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
- Special-PVC data cables
- Temperature Range: Flexing -5°C to +70°C ,
- Operating Peak Voltage: (not for purposes of high current and power installation) 500 V
- Test Voltage: 1500V
- Insulation Resistance: min. 10 MOhm x km
- Capacitance: (approx.-value) at 800 Hz, 120 pF/m
- Inductance: approx. 0,7 mH/km
Cable Structure:
- Bare copper-conductor, from 0,5 mm² to DIN VDE 0295 cl.5, fi ne-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of special PVC
- Core identi cation to DIN 47100, without colour repetition
- Cores stranded in layers with optimal lay-length
- Foil wrapping
- Tinned, copper braided screen,
- Outer sheath of special PVC
- Sheath colour grey (RAL 7001)
- with meter marking
Properties:
- Oil resistant, oil-/ chemical resistance
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to IEC 60332-1
Application:
These cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, LiY-CY(TP) is well suited for use in areas subject to signal interference. The high level of screening reduces substantially the eff ects of electrical disturbances from parallel running wiring etc. The copper screening is also often used as an “earth”. The twisted pairs conform favourable cross-talk attenuation values.
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.